|
|
- Check the stabilizer
rubbers and stabilizer bushings for wear and
deterioration.
- Check the stabilizer bar for deterioration or
damage.
- Check all bolts for condition and
straightness.
|
|
1.After shaking the ball
joint stud several times, install the nut to the stud and
use special
tool preload socket (MB990326) to measure the turning torque
of the ball joint.
Standard value: 0.5 -
3.5 N·m
2.When the measured value
exceeds the standard value, replace the stabilizer link
(Refer
to  ).
3.When
the measured value is lower than the standard value, check
that the ball joint
turns smoothly without excessive play. If so, it is possible
to re-use that ball joint.
|
|
|
1.Check the dust cover for
cracks or damage by pushing it with your finger.
|
|
|
2.If the dust cover is
cracked or damaged, replace the stabilizer link (Refer to ).
| note |
Cracks or damage of the dust
cover may cause damage to the ball
joint.
|
|