REMOVAL AND INSTALLATION


caution *: Indicates parts which should be temporarily tightened, and then fully tightened with the vehicle on the earth in an unladen condition.
Post-installation Operation
  • Front Wheel Alignment Check and Adjustment (Refer to ).




Removal steps

>>A<<
 1.
 Washer

>>A<<
 2.
 Strut bar bushing


3.
 Collar

>>A<<
 4.
 Washer


5.
 Bump stopper


6.
 Strut bar

INSTALLATION SERVICE POINT

>>A<< WASHER/STRUT BAR BUSHING INSTALLATION

1.Install the washer and strut bar bushing to the direction as shown in the figure.
2.Tighten the nut (a).
Tightening torque: 162 ± 24 N·m
3.Tighten the nut (b).
Tightening torque: 162 ± 24 N·m
4.Install so that the dimension (A) shown in the figure will meet the standard value.
Standard value (A): 99.5 mm