REMOVAL AND INSTALLATION <RH DRIVE VEHICLES>


Pre-removal Operation
  • Brake Fluid Draining

 Post-installation Operation
  • Brake Fluid Supplying and Air Bleeding.
  • Brake Pedal Adjustment.





Removal steps


1.
 Brake fluid level switch connector


2.
 Brake master cylinder assembly and brake pipe connection


3.
 Brake master cylinder assembly

>>B<<
 4.
 Vacuum hose (A) (with built-in check valve)

>>B<<
 5.
 Hose clip

>>A<<
 6.
 Vacuum hose (B)

>>A<<
 7.
 Hose clip


8.
 Vacuum hose


9.
 Hose clip


10.
 Vacuum pipe


11.
 Clamp


12.
 Snap pin


13.
 Clevis pin


14.
 Brake booster mounting nut


15.
 Sealer


16.
 O-ring


17.
 Brake booster assembly

INSTALLATION SERVICE POINTS

>>A<< HOSE CLIP/VACUUM HOSE (B) INSTALLATION

1.Install the vacuum hose (B) with its marking located as shown in the figure.
2.Install the hose clip located as shown in the figure.

>>B<< HOSE CLIP/VACUUM HOSE (A) (WITH BUILT-IN CHECK VALVE) INSTALLATION

1.Install the vacuum hose (A) (with built-in check valve) with its marking located as shown in the figure.
2.Install the hose clip located as shown in the figure.