ACTUATOR TEST TABLE

Using M.U.T.-III, the following actuators can be forcibly operated:

note

ABS is operated by ABS-ECU.
When ABS-ECU is disabled due to the fail-safe function, the actuator test cannot be performed.
The actuator test can be performed only when the vehicle is stationary.
While the actuator test is performed, the ABS warning lamp illuminates.
After the actuator test has been performed, the brake warning lamp and ABS warning lamp illuminate until the ignition switch is turned to ON again or the communication between M.U.T.-III and ABS-ECU is terminated.

Item No.	Check item	Driven component
01	FL wheel ABS drive	Solenoid valve for the corresponding channel of the hydraulic unit and pump motor (simplified inspection mode)
02	FR wheel ABS drive
03	RL wheel ABS drive
04	RR wheel ABS drive