|
1.Place the front wheel on a
turning radius gauge and measure the steering
angle.
|
|
Item
|
2WD (Except
high rider)
|
2WD (High
rider), 4WD
|
Inner
wheel
|
39°10’
±
2°00’*
|
36°50’
±
2°00’*
|
Outer wheel
(reference value)
|
34°10’
|
32°40’
|
|
| note |
*: Difference between
right and left wheels must be 2°00’
or less.
|
2.If the steering angle is not within the
standard value, adjust the toe-in as follows.
Standard value:
at the
centre of tyre tread: 0 - 5 mm
Toe-angle
(per wheel): 0° 00’ -
0°12’
|
|
3.Adjust the toe-in by
undoing the clip and lock nut, and turning the left and
right tie rod turnbuckles by the same amount (in opposite
directions).
| note |
The toe will move out as the
left turnbuckle is turned toward the front of
the vehicle and the right turnbuckle is turned
toward the rear of the vehicle.
|
4.Tighten the lock nut to the specified
torque, and tighten the bellows by the
clip.
Tightening torque: 93 ± 15
N·m
5.Recheck the steering
angle.
|
