REMOVAL AND INSTALLATION <L.H.DRIVE VEHICLES>


Pre-removal OperationPower steering fluid draining (Refer to ).
 Post-installation OperationPower steering fluid refilling (Refer to ) and bleeding (Refer to ).





Removal steps


1.
 Power steering oil reservoir cap


2.
 Power steering oil reservoir


3.
 O-ring


4.
 Clip


5.
 Clip

>>E<<
 6.
 Power steering oil return hose


7.
 Clip

>>D<<
 8.
 Power steering oil pump suction hose


9.
 Eye bolt


10.
 Gasket

>>C<<
 11.
 Power steering oil pressure hose

>>A<<
 12.
 Power steering oil pressure tube


13.
 O-ring


14.
 Power steering oil line bracket A


15.
 Power steering oil line bracket B


16.
 Power steering oil line bracket C <2WD (Except High rider)>


17.
 Clip


18.
 Power steering oil return tube

>>B<<
 19.
 Power steering oil return hose

>>A<<
 20.
 Power steering oil return tube


21.
 O-ring

INSTALLATION SERVICE POINTS

>>A<< POWER STEERING OIL RETURN TUBE ASSEMBLY/POWER STEERING OIL PRESSURE TUBE ASSEMBLY INSTALLATION

Align the mating marks on the gear box, return tube assembly and pressure tube assembly when installing.

>>B<< POWER STEERING OIL RETURN HOSE INSTALLATION


1.Install the clips as shown in the figure.
2.Install so that the mating marks are faced forward.

>>C<< POWER STEERING OIL PRESSURE HOSE ASSEMBLY INSTALLATION
1.Install so that the mating marks are facing rearward.

2.Place the pressure hose stopper to touch the power steering oil pump stopper, and install the pressure hose assembly.

>>D<< POWER STEERING OIL PUMP SUCTION HOSE INSTALLATION
Install so that the markings are faced upward.

>>E<< POWER STEERING OIL RETURN HOSE INSTALLATION
Install the return hose so that the markings and lines are faced rearward.