REMOVAL AND INSTALLATION <R.H.DRIVE VEHICLES>

<4G6>

<Vehicles with oil cooler tube> Removal steps 1. Power steering oil reservoir cap 2. Power steering oil reservoir 3. O-ring 4. Clip >>C<< 5. Power steering oil return hose (power steering oil reservoir side) 6. Clip >>E<< 7. Power steering oil pump suction hose 8. Eye bolt 9. Gasket >>D<< 10. Power steering oil pressure hose >>A<< 11. Power steering oil pressure tube 12. O-ring 13. Clip >>C<< 14. Power steering oil return hose (power steering oil cooler tube side) 15. Power steering oil cooler tube 16. Clip 17. Clip >>B<< 18. Power steering oil return hose 19. Power steering oil line bracket B 20. Power steering oil line bracket A 21. Power steering oil return tube >>A<< 22. Power steering oil return tube 23. O-ring

Align the mating marks on the gear box, return tube assembly and pressure tube assembly when installing.

1.Install the clips as shown in the figure. 2.Install so that the mating marks are faced forward.

Install the return hose so that the markings and lines are faced rearward.

2.Place the pressure hose stopper to touch the power steering oil pump stopper, and install the pressure hose assembly.