REMOVAL AND INSTALLATION


Pre-removal and Post-installation Operation
  • Rear pillar upper trim Removal and Installation (Refer to GROUP 52A, Interior Trim <Club Cab>).
  • Rear Pillar Upper Trim Removal and Installation (Refer to GROUP 52A, Interior Trim <Double Cab>).





Removal steps
<<A>>
 >>B<<
 1.
 Rear window glass

>>A<<
 2.
 Window dam

>>A<<
 3.
 Glass stopper

>>A<<
 4.
 Fastener

REMOVAL SERVICE POINT

<<A>> REAR WINDOW GLASS REMOVAL
Remove the rear window glass in the same procedure as for the windshield glass removal (Refer to ).

INSTALLATION SERVICE POINTS

>>A<< FASTENER/GLASS STOPPER/WINDOW DAM INSTALLATION
1.
caution Leave the degreased parts for 3 or more minutes to dry well, before starting on the next step. Do not touch the degreased parts.
Use the parts cleaner (MZ100387 or equivalent) to degrease the inside and outside edges of the rear window glass and the surface of the body flange.
2.

Install the fasteners and glass stoppers to the specified positions of the rear window glass.

3.Install the fasteners to the left and right lower corner of the body flange.
4.Install the window dam.

>>B<< REAR WINDOW GLASS INSTALLATION
Install the rear window glass in the same way as for the windshield glass installation (Refer to ).