REMOVAL AND INSTALLATION <DOUBLE CAB AND SINGLE CAB>

Post-installation Operation

Door Fit Adjustment (Refer to ).

			Removal steps
		1.	Damper
		·	Front Scuff Plate and Cowl Side Trim (Refer to GROUP 52A, Interior Trim <Single Cab> <Double Cab>.
		2.	Wiring harness connector connection
		3.	Door check connecting bolt
		4.	Door assembly
		5.	Door upper hinge
		6.	Door lower hinge
	>>A<<	7.	Striker
		8.	Striker shim
		9.	Door switch

			Removal steps
		1.	Damper
		2.	Wiring harness connector connection
		3.	Door check connecting bolt
		4.	Door assembly
		·	Centre pillar trim lower (Refer to GROUP 52A, Interior Trim .)
		5.	Door upper hinge
		6.	Door lower hinge
	>>A<<	7.	Striker
		8.	Striker shim
		9.	Door switch

INSTALLATION SERVICE POINT

>>A<< STRIKER INSTALLATION

Align the centre of the striker and latch within ±1.5 mm, and install.