REMOVAL AND INSTALLATION <DOUBLE CAB AND SINGLE CAB>

Removal steps · Pull handle bracket (Refer to GROUP 52A, Door Trim .) >>B<< 1. Waterproof film 2. Door beltline weatherstrip inner · Door trim assembly (Refer to GROUP 52A, Door Trim .) 3. Door beltline moulding 4. Door window glass runchannel >>A<< 5. Rear lower sash 6. Door window glass runchannel rear · Cowl side trim and centre pillar upper trim (Refer to GROUP 52A, Interior Trim <Single Cab>, <Double Cab>.) 7. Door opening weatherstrip inner <<A>> 8. Door opening weatherstrip outer

Removal steps · Pull handle bracket (Refer to GROUP 52A, Door Trim .) >>B<< 1. Waterproof film 2. Door beltline weatherstrip inner · Door trim assembly (Refer to GROUP 52A, Door Trim .) 3. Door beltline moulding 4. Rear door garnish · Door window regulator assembly (Refer to .) 5. Door window glass runchannel 6. Rear door window lower sash · Rear scuff plate, centre pillar upper trim and rear pillar upper trim (Refer to GROUP 52A, Interior Trim .) 7. Door opening weatherstrip inner <<A>> 8. Door opening weatherstrip outer

Make a fabricated tool as shown in the illustration to remove the door opening weatherstrip outer.

caution When sticking the waterproof film, ensure that the sealant is applied under the inner panel water drain hole. Apply the specified sealant to the waterproof film as shown and stick the film. Specified sealant: 3M ATD Part No.8625 or equivalent