Standard value (B): 0.3 - 1.2 mm (target value: 0.7 mm)
2.If it is outside the standard value range, remove the rear gate cover (Refer to
). |
1.Check that the rear gate
outside handle play is within the standard value
range. Standard value (B): 0.3 - 1.2 mm (target value: 0.7 mm) 2.If it is outside the standard value range, remove the rear gate cover (Refer to ). |
 |
3.Remove the rear gate
outside handle holder. Adjust the play by changing the
connecting point between the rear gate handle controller rod
and the rear gate outside handle. |