![](../../../img/42/ACE02984AB00ENG.png)
|
1.Remove the power window
fuse and connect an ammeter as shown in the
illustration. 2.When the power window switch is
operated to the “UP” position, a
large amount of current flows at the time when the window
starts to close and when it is fully
closed, so measure the operation current in the interval
between these two points. Standard value: 5
± 1A (Power supply voltage 14.5 ± 0.5V,
25°C) 3.If the operation current is
outside the standard value, refer to .
|