REMOVAL AND INSTALLATION



Removal steps

>>B<<
 1.
 Rear spoiler assembly upper


2.
 Grommet

>>B<<
 3.
 Rear spoiler assembly lower

>>A<<
 4.
 Pad

INSTALLATION SERVICE POINTS

>>A<< PAD INSTALLATION
caution Be careful not to damage the surface of the rear spoiler assembly lower.
1.Remove the pad remaining on the surface of the rear spoiler assembly lower.
2.Use parts cleaner (MITSUBISHI MOTORS GENUINE Part No. MZ100387) or equivalent to degrease the tape application surface.


3.Install the pad on the installation position of the rear spoiler assembly lower as shown in the figure.

>>B<< REAR SPOILER ASSEMBLY INSTALLATION
caution Be careful not to damage the surfaces of the rear spoiler assembly and rear gate assembly.
1.Remove the double-sided tapes remaining on the surfaces of the rear spoiler assembly and rear gate assembly.
2.Use parts cleaner (MITSUBISHI MOTORS GENUINE Part No. MZ100387) or equivalent to degrease the tape application surface.
3.Apply the specified primer to the double-sided adhesive tape surface. Then dry it off sufficiently.
Specified primer: 3M™ K-520
4.Apply the double-sided tapes on the rear spoiler assembly.
5.Install the rear spoiler assembly on the rear gate assembly.