REMOVAL AND INSTALLATION



Removal steps


·
 Front door sash trim (Refer to GROUP 52A, Door Trim )


·
 Door mirror connector connection

>>A<<
 1.
 Door mirror assembly
<<A>>
2.
 Mirror
<<A>>
3.
 Door mirror base cover
<<B>>
4.
 Door mirror outer cover

<REMOTE CONTROLLED MIRROR SWITCH>



Remote controlled mirror switch removal steps


·
 Instrument panel lower assembly (Refer to group 52A, Instrument lower panel assembly .)


1.
 Remote controlled mirror switch

REMOVAL SERVICE POINTS

<<A>> MIRROR REMOVAL

caution The claw of the mirror is prone to breakage when working in cold temperatures. Always warm up the mirror claw and claw periphery to 20°C or higher before handling.
Slant the mirror upward with your hands. Then insert a flat-tipped screwdriver wrapped with protective tape between the pivot plate and mirror through the cut-out from behind the mirror. Now pry off the mirror claw and remove the mirror as shown.

<<B>> DOOR MIRROR OUTER COVER REMOVAL
1.Remove the mirror.
2.

Release the claws of door mirror outer cover from the door mirror assembly as shown in the illustration.
3.Remove the cover from the door mirror assembly.

INSTALLATION SERVICE POINT

>>A<< DOOR MIRROR BODY ASSEMBLY INSTALLATION

Install the door mirror body assembly with the nuts in the numerical order as shown in the illustration.