REMOVAL AND INSTALLATION

			Front overfender removal steps
<<A>>		1.	Front overfender
	>>A<<	2.	Front overfender pad
			Rear overfender removal steps
<<A>>		3.	Rear overfender
	>>A<<	4.	Rear overfender pad

REMOVAL SERVICE POINT

<<A>> FRONT/REAR OVERFENDER REMOVAL

Use the special tool ornament remover (MB990784) to pry out the overfender.

INSTALLATION SERVICE POINT

>>A<< FRONT/REAR OVERFENDER PAD INSTALLATION

1.Wipe the double-sided tape application surface on the front/rear overfender and clean it with a rag moistened with the parts cleaner (MZ100387 or equivalent).

2.Tear off the double-sided tape backing paper of the front/rear overfender pad.

3.Install the pad to the overfender.

note

If the double-sided tape is difficult to affix in cold temperature, etc., warm the bonding surfaces of the overfender to about 40 - 60°C before affixing the tape.

4.Firmly press in the pad to the overfender.