|
Check that the windshield intermittent wiper interval can be adjusted by operating the
windshield intermittent wiper volume control.
|
|
Q.
Is the check result normal?
|
|
Refer to Inspection Procedure 5 "The windshield intermittent wiper interval cannot
be adjusted by operating the windshield intermittent wiper volume control" .
|
|
|
|
Use the ETACS customisation function to confirm that "Front wiper operation" is set to
"Speed Sensitive".
|
|
Q.
Is the check result normal?
|
|
Use the ETACS customisation function to set "Front wiper operation" to "Speed
Sensitive" (Refer to ).
|
|
|
|
(1)Connect the M.U.T.-III to the diagnosis connector.
|
|
(2)Use the M.U.T.-III to enter simulated vehicle speed.
- Item No.1: Speedometer (Refer to
.)
OK: The speedometer shows that simulated vehicle speed.
|
|
Q.
Is the check result normal?
|
|
Perform the troubleshooting to the speedometer (Refer to GROUP 54A -
Combination
Meter, Inspection Procedure 5 "Speedometer does not work." Refer to .)
|
|
|
|
Check that the intermittent wiper interval depends on the vehicle speed.
|
|
Q.
Is the check result normal?
|
|
Intermittent malfunction (Refer to GROUP 00 -
How to Use Troubleshooting/Inspection
Service Points - How to Cope with Intermittent Malfunction ).
|
|
|
|
Replace the ETACS-ECU (Refer to GROUP 54A -
ETACS, ETACS-ECU ).
|
|
|