REMOVAL AND INSTALLATION

<VEHICLES WITH REAR BODY>

		Removal steps
<<A>>	1.	Licence plate lamp assembly
	2.	Socket
	3.	Bulb
	4.	Licence plate lamp unit

<VEHICLES FOR STEP BUMPER TYPE>

			Removal steps
		1.	Harness band
		2.	Licence plate lamp assembly
		3.	Cover
		4.	Lens
		5.	Gasket
		6.	Bulb
		7.	Licence plate lamp base

<VEHICLES WITHOUT REAR BODY>

			Removal steps
		1.	Licence plate lamp assembly
		2.	Cover
		3.	Lens
		4.	Gasket
		5.	Bulb
		6.	Licence plate lamp base
		7.	Dummy bracket
		8.	Licence plate lamp bracket assembly

REMOVAL SERVICE POINT

<<A>> LICENCE PLATE LAMP ASSEMBLY REMOVAL

Use special tool ornament remover (MB990784) to press the licence plate assembly to the direction shown (inside the vehicle), and shorten the claw B and disengage the claw A. Then remove the licence plate lamp assembly.