MULTIVISION DISPLAY REMOVAL AND INSTALLATION

note

When the multivision display is replaced, always turn the ignition switch to the "ON" position once and then carry out the operation check.

Pre-removal and post-installation OperationInstrument Centre Panel Assembly Removal and Installation (Refer to GROUP 52A - Instrument Centre Panel

		Removal steps
	1.	Multivision display /Bracket
	2.	Bracket (LH/RH)
>>A<<	3.	Multivision display
	·	Passenger’s (front) air bag module (Refer to GROUP 52B - Passenger’s (front) Air Bag Module.)
	4.	GPS antenna

INSTALLATION SERVICE POINT

>>A<< MULTIVISION DISPLAY INSTALLATION

The connectors, antenna and cables connected to the multivision display are shown in the figure.