Inspection Procedure 3: The radio broadcasting cannot be received. <Digital radio (vehicles with DAB tuner)>

caution

Before replacing the multivision display, ensure that the power supply circuit, the earth circuit and the communication circuit are normal.

COMMENTS ON TROUBLE SYMPTOM

In case of digital radio broadcasting cannot be received, antenna rod, antenna base, antenna feeder or multivision display (integrated DAB tuner) may have a problem.

PROBABLE CAUSES

Malfunction of antenna rod
Malfunctions of antenna base
Malfunction of antenna feeder
Malfunction of multivision display (integrated DAB tuner)
Damaged harness wires and connectors

DIAGNOSIS PROCEDURE

STEP 1. Confirmation in multivision display service mode.

(1)Display the "Communication Check" screen (Refer to

(2)Check that "Tuner/DAB" is "OK".

Q. Is the check result normal?

	Go to Step 2.

	Go to Step 5.

STEP 2. Check the state of the antenna rod and antenna base.

Q. Is the antenna assembled?

	Go to Step 3.

	Assemble antenna rod and antenna base.

STEP 3. Check if there is any damage to the antenna rod and antenna base, and antenna feeder.

Q. Is the check result normal?

	Go to Step 4.

	Replace the antenna rod and antenna base, and antenna feeder.

STEP 4. Check the connection of the antenna feeder’s plug and multivision display.

Q. Is the antenna feeder’s plug thoroughly connected to the multivision display?

	Go to Step 5.

	Thoroughly connect the antenna feeder’s plug and the multivision display.

STEP 5. Substitute a known good multivision display, and check the trouble symptom.

Q. Is the check result normal?

	Replace the multivision display (Refer to ).

	The trouble can be an intermittent malfunction (Refer to GROUP 00 - How to use Troubleshooting/inspection Service Points - How to Cope with Intermittent Malfunction).