REMOVAL AND INSTALLATION


ROOF ANTENNA



Removal steps


1.
 Antenna rod


·
 Headlining (Refer to GROUP 52A, Headlining )


2.
 Antenna base


·
 Instrument panel assembly (Refer to GROUP 52A - Instrument panel assembly )


3.
 Antenna feeder cable

PILLAR ANTENNA

Removal steps


·
 Accessory box (Refer to GROUP 52A, Instrument panel assembly ) <Vehicles without radio and CD player>


·
 Radio and CD player <Vehicles without display audio> or display audio <Vehicles with display audio> (Refer to )


·
 Lower panel assembly (Refer to GROUP 52A, Instrument panel assembly ) <Vehicles without knee air bag module>


·
 Knee air bag module (Refer to GROUP 52B, Knee air bag module ) <Vehicles with knee air bag module>


·
 Cowl side trim (LH <LHD> or RH <RHD>) (Refer to GROUP 52A, Interior trim <Single Cab>, <Double Cab>)
<<A>>
1.
 Antenna assembly


2.
 Antenna feeder cable

REMOVAL SERVICE POINT

<<A>> ANTENNA ASSEMBLY REMOVAL

1.Pull out the feeder cable slightly until the tube end of the antenna can been seen.
caution Make sure that the cord is not loosened.
2.Insert a cord into the tube end, and secure the cord with plastic tape as shown.
3.Remove the antenna assembly by pulling it gradually.