|
1.Turn the ignition switch
to ACC or ON position.
|
![](../../../img/54/ACB05490AC00ENG.png)
|
2.Press the SPEECH
switch. 3.Say "Setup." 4.Say
"Pairing options." 5.The voice guide will say
"Select one of the following: pair, edit, delete, or list?" 6.Say
"Pair." 7.The voice guide will say
"Please say a 4-digit pairing code." 8.Say a 4
digit number. The 4 digit number will be registered as a
pairing code for the device.
- When the confirmation function is on, the system
will confirm whether the number said is acceptable.
Answer "Yes" to go Step 8. Say "No" to return to
pairing code selection.
note |
- The pairing code entered here is only
used for the Bluetooth®
connection certification. It is any
4-digit number the user would like to
select. A predetermined 4-digit number
may be assigned to some
Bluetooth®
devices.
- Remember the pairing code as it needs to
be keyed into the device later in the
pairing process.
- Depending on the connection settings of
the Bluetooth® device,
this code may have to be entered each
time you connect the
Bluetooth® device to
the hands free-ECU. For the default
connection settings, refer to the
instructions for device.
|
9.The voice guide will say
"Start pairing procedure on device. See device manual for instructions."
Refer to the owner’s manual for your device and enter
into the device the pairing code that was registered in Step
7. 10.When this system finds a
Bluetooth® device, the voice guide will say
"Please say the name of the device after the beep." 11.After
you hear the beep, name the device by saying a name of your
preference.
note |
When the confirmation function
is on, after repeating the device tag you have
said, the voice guide will ask
"Is this correct?" Answer "Yes". To change
the device tag, answer "No" and then say the
device tag again.
|
12.The voice guide will say
"Pairing complete," after which a beep will be played and
the pairing process will end.
|
|
1.Turn the ignition switch
to ACC or ON position.
|
|
2.Press the SPEECH
switch.
|
|
5.The voice guide will say
"Select one of the following: pair, edit, delete, or list"
|
|
7.After the voice guide says
"Please say," the numbers of the devices and device tags of
corresponding devices will be read out in order, starting
with the device that has been most recently connected. After
it completes reading all pairs, the voice guide will say
"or all." Say the number of the device that you want to
delete from the system. If you want to delete all
paired devices from the system, say "All."
|
|
8.For confirmation purposes,
the voice guide will say
"Deleting (device tag) (number). Is this correct?" or
"Deleting all devices, Is this correct?"
|
|
9.Answer "Yes" to delete the
devices. Answer "No" the system will return to Step
5.
|
|
10.The voice guide will say
"Deleted", and then the system will end the device deletion
process.
- If the device deletion process fails for some
reason, the voice guide will say "Delete failed."
and then the system will cancel deleting the
device.
|