| caution |
- When the ETACS-ECU is replaced, chassis number
writing and coding must be performed. When diagnosis
code No.B1760 "Coding not completed" or B1761
"Chassis No. not programmed" is set to the
ETACS-ECU, perform chassis number writing and
coding. Refer to the
"M.U.T.-III Owner’s Manual" and perform
coding.
- When the ETACS-ECU of vehicles without KOS is
replaced, the encrypted code of the ignition key
needs to be registered to the ETACS-ECU.
<Vehicles with Immobilizer System> (If
the encrypted code is not registered, the engine
cannot be started. Register the encrypted code as
described in
 .)
|
