Inspection Procedure 8: The hands-free cellular phone system does not operate normally.


caution
  • Whenever the multivision display is replaced, ensure that the power supply circuit and the earthing circuit are normal. (Check that the voltage is 10 V or more.)
  • Whenever the multivision display is replaced, select "Select Model" on the dealer mode screen.

COMMENTS ON TROUBLE SYMPTOM


If a hands-free cellular phone system does not function correctly, a Bluetooth® device is not paired or the multivision display may be defective.

PROBABLE CAUSES



DIAGNOSIS PROCEDURE


STEP 1. Check whether the Bluetooth® device is supported.


Check whether the Bluetooth® device is supported.
note Supported Bluetooth® devices are listed on the MITSUBISHI MOTORS web site.
http://www.mitsubishi-motors.com/en/products/mmes/index.html

Q. Is the check result normal?

Go to Step 2.

Use the supported Bluetooth® device.

STEP 2. Reset the MMES and check the trouble symptom.


(1)
caution
  • If the MMES is reset, all the data stored by customer will disappear. Therefore, prior to the reset, the agreement of the customer should be obtained.
  • If the MMES is reset, the guide line for the rear view camera will be initialised. In that case, readjust the guide line.
Reset the MMES. (Refer to .)
(2)Carry out the necessary pairing for the Bluetooth® device. (Refer to .)
(3)Check whether the hands-free cellular phone system works normally.

Q. Is the check result normal?

The diagnosis is complete.

Replace the multivision display.