|
1.Operate the parking
brake.
|
![](../../../img/23/ACF03632AB00ENG.png)
|
2.Move the selector lever to
every range and check that the lever moves smoothly with
secure feel of engagement. 3.Make sure that the
engine starts when the selector lever is in the "N" or "P"
range, and does not start when the selector lever is in
other range. 4.Start the engine. Release the
parking brake lever. 5.Make sure that the vehicle
moves forward when the selector lever is moved to "D" range,
or to the "B" range. Also make sure that the vehicle moves
backward when the selector lever is moved from the "N" to
"R" range. 6.Stop the engine. 7.Turn
"ON" the ignition switch, and move the selector lever from
the "P" to "R" range. Check that the backup light comes on
and the buzzer sounds at this time.
note |
Since the vehicle is equipped
with the CVT wrong-operation preventive device,
the selector lever cannot be moved out of the
"P" position without depressing the brake pedal
after turning "ON" the ignition switch.
|
|
|
1.Operate the parking
brake.
|
![](../../../img/23/ACC02911AB00ENG.png)
|
1.Move the selector lever to
every range and check that the lever moves smoothly with
secure feel of engagement. 2.Make sure that the
engine starts when the selector lever is in the "N" or "P"
range, and does not start when the selector lever is in
other range. 3.Start the engine. Release the
parking brake lever. 4.Make sure that the vehicle
moves forward when the selector lever is moved to "D" range,
"Ds" range, or to the "L" range. Also make sure that the
vehicle moves backward when the selector lever is moved from
the "N" to "R" range. 5.Stop the
engine. 6.Turn "ON" the ignition switch, and move
the selector lever from the "P" to "R" range. Check that the
backup light comes on and the buzzer sounds at this
time.
note |
Since the vehicle is equipped
with the CVT wrong-operation preventive device,
the selector lever cannot be moved out of the
"P" position without depressing the brake pedal
after turning "ON" the ignition switch.
|
|