REMOVAL AND INSTALLATION


Pre-removal and post-installation operation
  • Rear pillar trim and Rear shelf trim removal and installation (Refer to GROUP 52A - Interior Trim ).





Removal steps


·
 Harness connector
<<A>>
 >>B<<
 1.
 Rear window glass

>>A<<
 2.
 Glass stopper

>>A<<
 3.
 Rear window spacer

REMOVAL SERVICE POINT

<<A>> REAR WINDOW GLASS REMOVAL
Remove the rear window glass by the same procedure as for the windshield.
note Use a piano wire to remove the rear window glass.

INSTALLATION SERVICE POINTS

>>A<< REAR WINDOW SPACER/GLASS STOPPER INSTALLATION
1.
caution Before the next operation, leave the degrease parts for 3 minutes or more to dry. Do not touch the coated surface.
Use parts cleaner to degrease the inside circumference of the windshield and the body flanges.
2.

Install the rear window spacer and glass stopper to the specified position so that there are no adrift or bent surfaces inside the rear window glass.

>>B<<REAR WINDOW GLASS INSTALLATION
1.Apply the primer and adhesive.
2.Install the rear window glass by the same procedure as for the windshield.