REMOVAL AND INSTALLATION

Pre-removal Operation

Engine Coolant Draining (Refer to ).
Timing Belt Removal (Refer to GROUP 11A, Timing Belt ).

Post-installation Operation

Timing Belt Installation (Refer to GROUP 11A, Timing Belt ).
Engine Coolant Refilling (Refer to ).

		Removal steps
	1.	Water pump
	2.	Water pump gasket
>>A<<	3.	O-ring

INSTALLATION SERVICE POINT

>>A<< O-RING INSTALLATION

Fit the O-ring to the groove in the water inlet pipe. Then lubricate the O-ring and the inside of the water pump with water, and then insert the pipe to the water pump.