|
|
1.Turn the ignition switch
to ON position.
|
|
2.Check that the auto-cruise
control indicator lamp within the combination meter
illuminates
when the MAIN switch is switched ON.
|
|
|
1.Switch ON the MAIN
switch.
|
|
|
2.Drive at the desired speed
within the range of approximately 40 -
200 km/h.
|
|
3.Push the auto-cruise
control switch in the direction of arrow.
4.Check
to be sure that when the switch is released the speed is the
desired constant
speed.
| note |
If the vehicles speed
decreases to approximately 15 km/h below
the set speed
because of climbing a hill for example, the
auto-cruise control will be cancelled.
|
|
|
|
1.Set to the desired
speed.
|
|
2.Push the auto-cruise
control switch in the direction of arrow.
3.Check
to be sure that acceleration continues while the switch is
hold, and that when
it is released the constant speed at the time when it was
released becomes the driving speed.
| note |
Acceleration can be continued
even if the vehicle speed has passed the
high-speed limit (approximately
200 km/h). But the speed when the
auto-cruise control switch is released will be
recorded
as the high-speed limit.
|
|
|
|
1.Set to the desired
speed.
|
|
2.Push the auto-cruise
control switch in the direction of arrow.
3.Check
to be sure that deceleration continues while the switch is
pressed, and that
when it is released the constant speed at the time when it
was released becomes the driving
speed.
| note |
When the vehicle speed reaches
the low limit (approximately 40 km/h)
during deceleration, the
auto-cruise control will be cancelled.
|
|
|
|
1.Set the auto-cruise speed
control.
|
|
2.When any of the following
operations are performed while at constant speed during
auto-cruise control, check if normal driving is resumed and
deceleration occurs.
(1)
The auto-cruise control switch is pulled in the direction of
arrow.
(2)
The brake pedal is depressed.
(3)
The selector lever is moved to the "N" range.
|
|
3.When the auto-cruise
control switch is pushed in the direction of arrow at a
vehicle speed
of 40 km/h or higher, check if the vehicle speed returns to
the speed before auto-cruise control
driving was cancelled, and constant speed driving
occurs.
4.When the MAIN switch is turned to OFF
while driving at constant speed, check if normal
driving is resumed and deceleration occurs.
|