DISASSEMBLY AND REASSEMBLY

			Disassembly steps
		1.	Pump cover
		2.	O-ring
		3.	Snap ring
		4.	Pulley and shaft
		5.	Vanes
	>>C<<	6.	Cam ring
		7.	Rotor
		8.	Pin
		9.	Side plate
	>>A<<	10.	O-ring
	>>B<<	11.	Oil seal
		12.	Plug assembly
	>>A<<	13.	O-ring
		14.	Flow control spring
		15.	Suction connector
	>>A<<	16.	O-ring

REASSEMBLY SERVICE POINTS

>>A<< O-RING INSTALLATION

No.	ID × Width mm
1	15.8 × 2.4
2	21.0 × 2.4
3	14.8 × 1.9

>>B<< OIL SEAL INSTALLATION

Use following special tool to install the oil seal.

MB990938: Bar (Snap-in type)
MB991203: Oil Seal and Bearing Installer

>>C<< CAM RING INSTALLATION

caution

Be sure to install the cam ring in the correct direction as shown.

Install the cam ring as shown in the illustration.