Code No. B1001,B1002: Interior temperature sensor system

COMMENTS ON TROUBLE SYMPTOM

This code is set when the interior temperature sensor circuit is open (Code No.B1002) or is short (Code No.B1001).

PROBABLE CAUSES

Malfunction of the interior temperature sensor
Damaged the wiring harness or connectors
Malfunction of the automatic air conditioner control panel (A/C-ECU)

DIAGNOSIS PROCEDURE

STEP 1. M.U.T.-III data list

Check that the following service data display contents are normal. (Refer to

.)

Item 01: Inside temperature sensor

Q. Is the check result normal?

	Go to Step 5.

	Go to Step 2.

STEP 2. Connector check: C-106 A/C-ECU connector and C-26 interior temperature sensor connector

Q. Is the check result normal?

Go to Step 3.

Repair the connector.

STEP 3. Check the wiring harness between C-106 A/C-ECU connector (terminals 1 and 18) and C-26 interior temperature sensor connector (terminals 1 and 2).

Check the sensor signal line and earth line for open or short circuit.

Q. Is the check result normal?

Go to Step 4.

Repair the wiring harness.

STEP 4. Check the interior temperature sensor.

Refer to

.

Q. Is the check result normal?

	Go to Step 5.

	Replace the interior temperature sensor.

STEP 5. M.U.T.-III diagnosis code

Q. Is the diagnosis code set?

	Replace the automatic air conditioner control panel (A/C-ECU).

	The trouble can be an intermittent malfunction (Refer to GROUP 00, How to Cope with Intermittent Malfunction ).