|
Check that ASC indicator lamp, ASC
OFF indicator lamp, ABS warning lamp and brake warning
lamp illuminate as follows.
|
![](../../../img/35/ACD02592AC00ENG.png)
|
1.When the ignition switch
is turned to the "ON" position, ASC indicator lamp, ASC OFF
indicator
lamp, ABS warning lamp and brake warning lamp
illuminate. 2.The ASC indicator lamp, ASC OFF
indicator lamp, ABS warning lamp and brake warning
lamp illuminate for three seconds*1 and
then turn "OFF"*2. 3.Otherwise,
check the diagnosis code.
note |
- *1: The ABS warning
lamp, the brake warning lamp, the ASC
indicator
lamp or the ASC OFF indicator lamp may
continue illuminating. When a diagnosis
code, which is associated
with the wheel speed sensor, the G and
yaw rate sensor or the steering wheel
sensor, is set
in the ASC-ECU as a historic fault, the
ECU will allow the warning/indicator
lamp to illuminate
until the relevant fault is
cleared.
- *2: The brake warning
lamp does not turn "OFF" when the
parking
brake is applied or the brake fluid
level is lowered.
|
|