|
Check that ASC indicator lamp, ASC
OFF indicator lamp, ABS warning lamp and brake warning
lamp illuminate as follows.
|
![](../../../img/35/ACD02592AE00ENG.png)
|
1.When the ignition switch
is turned to the "ON" position, ASC indicator lamp, ASC OFF
indicator
lamp, ABS warning lamp and brake warning lamp
illuminate. 2.The ASC indicator lamp, ASC OFF
indicator lamp, ABS warning lamp and brake warning
lamp illuminate for three seconds*1 and
then turn "OFF"*2. 3.Otherwise,
check the diagnosis code.
note |
- *1: The ABS warning
lamp, the brake warning lamp, the ASC
indicator
lamp or the ASC OFF indicator lamp may
continue illuminating. When a diagnosis
code, which is
associated with the wheel speed sensor,
the G and yaw rate sensor or the
steering wheel sensor,
is set in the ASC-ECU as a historic
fault, the ECU will allow the
warning/indicator lamp to
illuminate until the relevant fault is
cleared.
- *2: The brake warning
lamp does not turn "OFF" when the
parking
brake is applied or the brake fluid
level is lowered.
|
|