|
|
1.Check that the wheel
alignment is normal (Refer to GROUP 33 - On-vehicle
Service, Front Wheel Alignment Check and Adjustment  ).
|
|
2.Place the front wheel onto
the turning radius gauge, and measure the steering
angle.
Standard value: <Vehicle for
standard suspension with wheel size 14
inch>
|
|
Inner
wheel
|
42°
30’ ± 1°
30’
(Difference between
right and left wheels must be
2°00’ or
less)
|
Outer wheel
(Reference value)
|
35°
50’
|
|
Standard value: <Vehicle for
standard suspension with wheel size 15
inch>
|
|
Inner
wheel
|
41°
00’ ± 1°
30’
(Difference between
right and left wheels must be
2°00’ or
less)
|
Outer wheel
(Reference value)
|
35°
00’
|
|
Standard value: <Vehicle for
RHD high ground suspension with wheel size 14
inch>
|
|
Inner
wheel
|
42°
40’ ± 1°
30’
(Difference between
right and left wheels must be
2°00’ or
less)
|
Outer wheel
(Reference value)
|
36°
00’
|
|
Standard value: <Vehicle for
RHD high ground suspension with wheel size 15 inch>,
<Vehicle
for LHD high ground suspension>
|
|
Inner
wheel
|
41°
20’ ± 1°
30’
(Difference between
right and left wheels must be
2°00’ or
less)
|
Outer wheel
(Reference value)
|
35°
10’
|
|
|
|
3.If the measured value is
not within the standard value, adjust the tie-rod ends
(right
and left), and repeat Steps 1 and 2.
4.If the
measured value is not within the standard value after
performing Step 3, replace
the steering gear and linkage assembly (Refer to ).
|