|
Put the oil return pipe gasket tab
in the position shown in the illustration to install
the oil return pipe gasket.
|
|
1.After making sure that the
turbocharger stay is in close contact with the turbocharger
and the cylinder block, temporarily tighten the turbocharger
stay. 2.Tighten the bolts to the specified torque
of 47 ± 11 N·m at the
cylinder block side. 3.Tighten the bolts to the
specified torque of 24 ± 5 N·m at the turbo
charger side.
|
|
1.After making sure that the
turbocharger bracket is in close contact with the
turbocharger
and the cylinder block, temporarily tighten the turbocharger
bracket. 2.Tighten the bolts to the specified
torque of 23 ± 6 N·m at the cylinder
head side. 3.Tighten the nuts to the specified
torque of 59 ± 5 N·m at the turbo
charger side.
|
|
1.Use the eye bolts to
temporarily install the oil pipe to the cylinder block and
the turbo
charger.
note |
Make sure that the gasket is
installed.
|
2.Tighten the eye bolts to the specified
torque of 15 ± 2 N·m.
note |
Do not bend and twist the oil
pipe.
|
3.Tighten the flange bolts to the specified
torque of 9.5 ± 2.5 N·m.
|