![](../../../img/14/AC606081AE00ENG.png)
|
1.Make mating marks on the
radiator lower hose and the hose clip as shown to install
them
in the original position.
|
![](../../../img/14/AC302615AE00ENG.png)
|
2.Break off the tip of hose
clip claw and spread out the hose clip, then disconnect the
radiator lower hose.
note |
If there is a hose clip claw,
the hose clip cannot spread to capacity because
the claw
contacts the hose clip.
|
|
![](../../../img/14/AC005977AB00ENG.png)
|
Install the thermostat with care to
avoid peeling or damage to the rubber ring. When installing
the thermostat, face the jiggle valve of the thermostat
upward.
|
![](../../../img/14/AC103007AM00ENG.png)
|
Fit the O-ring in the pipe groove,
wet the O-ring circumference or the pipe mounting area
inner wall, and then insert the O-ring.
|
|
1.
caution |
Never reuse the hose clip
whose claw is broken off to prevent
the rusting.
|
Make mating mark on a new hose clip in the same
position as the remove one.
|
![](../../../img/14/AC606082AW00ENG.png)
|
2.Insert the radiator lower
hose until the protrusion of the radiator lower
pipe. 3.Align the mating marks on the radiator
lower hose and hose clip. 4.Remove the hose clip
claw and shorten the hose clip, then install the radiator
lower
hose.
|