REMOVAL SERVICE POINTS |
<<A>> RIVET REMOVAL |
|
![]() |
Use a drill (6.0 mm) to make a hole
in the rivet to break it, and then remove the
rivet. |
INSTALLATION SERVICE POINT |
>>A<< RIVET INSTALLATION |
![]() |
Use a rivet tool shown in the
illustration to connect the parts with rivets by the
following
procedures. 1.Insert the rivet into a corresponding location. 2.Set the rivet tool at a portion A of rivet. 3.While pushing the flange surface of the rivet onto parts to be fixed with the rivet tool, press the handle of the tool. 4.Thin part of portion A of the rivet will be cut off and the parts is fixed in position. |