REMOVAL AND INSTALLATION



Removal steps


1.
 Water hose


2.
 Water hose


3.
 Water hose


4.
 Water hose

>>D<<
 5.
 Engine coolant temperature sensor


6.
 Water outlet fitting


7.
 Water outlet fitting gasket

>>A<<
 8.
 Water outlet pipe

>>A<<
 9.
 O-ring


10.
 Water inlet fitting

>>C<<
 11.
 Thermostat


12.
 Thermostat case


13.
 Thermostat case gasket


14.
 Fitting


15.
 Fitting gasket


16.
 Water passage

>>B<<
 17.
 Water passage gasket

>>A<<
 18.
 Water pipe

>>A<<
 19.
 O-ring

INSTALLATION SERVICE POINTS

>>A<< O-RING / WATER PIPE INSTALLATION



caution Keep the O-ring free of oil or grease.
Wet the O-ring (with water) to ease assembly.

>>B<< WATER PASSAGE GASKET

Install water passage gasket so that its side drop comes to the engine inside as shown in the illustration.

>>C<< THERMOSTAT INSTALLATION

Install the thermostat in the thermostat case with its jiggle valve located at the top position.

>>D<< ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

When reusing the sensor, apply the specified sealant to the threads.
Specified sealant:
3MTM AAD Part No. 8731 or equivalent