DIAGNOSIS PROCEDURE |
STEP 1. Connector check: D-202 accelerator pedal position connector |
Q.
Is the check result normal?
|
![]() |
|
![]() |
|
STEP 2. Perform resistance measurement at D-202 accelerator pedal position sensor connector. |
|
OK: Continuity (2 Ω or
less) |
Q.
Is the check result normal?
|
![]() |
|
![]() |
|
STEP 3. Connector check: D-246 engine-ECU <M/T> connector or D-217 engine-A/T-ECU <A/T> connector |
Q.
Is the check result normal?
|
![]() |
|
![]() |
|
STEP 4. Check harness between D-202 (terminal No. 2) accelerator pedal position sensor connector and D-246 (terminal No. 91) engine-ECU <M/T> connector or D-217 (terminal No. 91) engine-A/T-ECU <A/T> connector. |
|
Q.
Is the check result normal?
|
![]() |
|
![]() |
|
STEP 5. Check the trouble symptoms |
Q.
Does trouble symptom persist?
|
![]() |
|
![]() ![]() |
|
STEP 6. Perform resistance measurement at D-202 accelerator pedal position sensor connector. |
|
OK: Continuity (2 Ω or
less) |
Q.
Is the check result normal?
|
![]() |
|
![]() |
|
STEP 7. Connector check: D-246 engine-ECU <M/T> connector or D-217 engine-A/T-ECU <A/T> connector |
Q.
Is the check result normal?
|
![]() |
|
![]() |
|
STEP 8. Check harness between D-202 (terminal No. 5) accelerator pedal position sensor connector and D-246 (terminal No. 120) engine-ECU <M/T> connector or D-217 (terminal No. 120) engine-A/T-ECU <A/T> connector. |
|
Q.
Is the check result normal?
|
![]() |
|
![]() |
|
STEP 9. Connector check: D-246 engine-ECU <M/T> connector or D-217 engine-A/T-ECU <A/T> connector |
Q.
Is the check result normal?
|
![]() |
|
![]() |
|
STEP 10. Check harness between D-202 (terminal No. 1) accelerator pedal position sensor connector and D-246 (terminal No. 92) engine-ECU <M/T> connector or D-217 (terminal No. 92) engine-A/T-ECU <A/T> connector. |
|
Q.
Is the check result normal?
|
![]() |
|
![]() |
|
STEP 11. Check harness between D-202 (terminal No. 4) accelerator pedal position sensor connector and D-246 (terminal No. 102) engine-ECU <M/T> connector or D-217 (terminal No. 102) engine-A/T-ECU <A/T> connector. |
|
Q.
Is the check result normal?
|
![]() |
|
![]() |
|
STEP 12. Check harness between D-202 (terminal No. 3) accelerator pedal position sensor connector and D-246 (terminal No. 114) engine-ECU <M/T> connector or D-217 (terminal No. 114) engine-A/T-ECU <A/T> connector. |
|
Q.
Is the check result normal?
|
![]() |
|
![]() |
|
STEP 13. Check harness between D-202 (terminal No. 6) accelerator pedal position sensor connector and D-246 (terminal No. 107) engine-ECU <M/T> connector or D-217 (terminal No. 107) engine-A/T-ECU <A/T> connector |
|
Q.
Is the check result normal?
|
![]() |
|
![]() |
|
STEP 14. Replace the accelerator pedal assembly |
|
Q.
Is the check result normal?
|
![]() |
|
![]() |
|