FUEL TANK PUMP (MODULE) REPLACEMENT <6G7>

1.Remove the front scuff plate (R.H.) and outer seat belt (front) anchor bolt (R.H.), and then turn the floor carpet (Refer to GROUP 52A - Trim ).

2.Remove the service hole cover.

3.Disconnect the fuel tank pump module assembly connector, fuel suction hose, fuel high-pressure tube. 4.Remove the mounting nuts and retainer plate, and remove the fuel tank pump module assembly from the service hole. 5.Install the fuel tank pump module assembly to the fuel tank through the service hole. 6.Install the retainer plate to the fuel tank and tighten the mounting nuts.

7. caution After connecting the fuel high-pressure tube, slightly pull it to ensure that it is installed securely. Also confirm that there is a play approximately 3mm. Connect the fuel tank pump module assembly connector, fuel tank suction hose, fuel high-pressure tube. 8.Install the service hole cover. 9.Spread the floor carpet, and then install the front scuff plate (R.H.) and outer seat belt (front) anchor bolt (R.H.) (Refer to GROUP 52A - Trim ).

2.Remove the service hole cover (upper side).

3.Remove the service hole cover (lower side).

4.Disconnect the fuel tank pump module assembly connector, fuel suction hose, fuel high-pressure tube. 5.Remove the mounting nuts and retainer plate, and remove the fuel tank pump module assembly from the service hole. 6.Install the fuel tank pump module assembly to the fuel tank through the service hole. 7.Install the retainer plate to the fuel tank and tighten the mounting nuts.

8. caution After connecting the fuel high-pressure tube, slightly pull it to ensure that it is installed securely. Also confirm that there is a play approximately 3mm. Connect the fuel tank pump module assembly connector, fuel tank suction hose, fuel high-pressure tube. 9.Install the service hole cover (lower side). 10.Install the service hole cover (upper side). 11.Restore the second seat (R.H.).