REMOVAL AND INSTALLATION

Pre-removal and Post-installation Operation

Quarter Trim Upper Removal and Installation (Refer to GROUP 52A, Trims <Long wheelbase> .)

		REMOVAL STEPS
		1.	Quarter window link
		2.	Rubber, nut
	>>A<<	3.	Quarter window glass
		4.	Quarter window weatherstrip
		5.	Quarter window hinge
<<A>>	>>A<<	6.	Quarter window moulding
		7.	Quarter window garnish

REMOVAL SERVICE POINT

<<A>> QUARTER WINDOW MOULDING REMOVAL

Remove the quarter window moulding using the same procedure as for windshield removal (Refer to

INSTALLATION SERVICE POINT

>>A<< QUARTER WINDOW MOULDING/QUARTER WINDOW GLASS INSTALLATION

1.Remove old adhesive remaining at the groove of the quarter window moulding and quarter window glass
2.

caution

Allow the degreased portion to dry for at least three minutes before proceeding to the next procedure. Do not touch any surface that has been cleaned.

Apply the primer sufficiently on the portion of the quarter window glass to adhere evenly and without blur.
3.After applying the specified sealant on the specified area of the quarter window glass, mount the quarter window moulding on the quarter window glass.