REMOVAL AND INSTALLATION

Door mirror assembly removal steps · Front door trim and door sash trim (Refer to GROUP 52A, Door Trim ) · Door mirror connector connection 1. Door mirror assembly Door mirror outer cover removal steps <<A>> 2. Mirror <<B>> >>A<< 3. Door mirror outer cover Side-turn lamp assembly and door housing cover removal steps <<A>> 2. Mirror <<B>> >>A<< 3. Door mirror outer cover 4. Door mirror housing cover <vehicles without approach lamp> 5. Side-turn lamp assembly <vehicles with approach lamp> Remote controlled mirror switch removal steps · Instrument panel under cover (Refer to group 52A, Instrument panel assembly .) 6. Remote controlled mirror switch

caution The tab of the mirror is prone to breakage when working in cold temperatures. Always use a hair drier or the like to warm up the mirror tab and its periphery to 20°C or higher prior to works. When the mirror is heated too quickly from its cold state, it may be broken. 1.Slant the mirror upward with your hands. Then insert a flat-tipped screwdriver wrapped with protective tape between the pivot plate and mirror through the cut-out from behind the mirror. Now pry off the mirror tab and release the lower side of the mirror as shown in the illustration. 2.Release the upper side of the mirror from the tab as shown while pulling out the mirror. 3.Disconnect the connectors of the heated mirror.

Remove the door mirror outer cover by disengaging the claws in the numerical order of the illustration from the mirror body side.

caution Tap the claw positions to confirm that they are engaged securely. Install the door mirror outer cover by engaging the claws in the numerical order of the illustration.