|
The windshield wiper motor or the front-ECU may
be defective.
|
|
- Malfunction of the windshield wiper motor
- Malfunction of the front-ECU
- Damaged harness wires and connectors
|
|
Q.
Is the check result normal?
|
|
Q.
Is the check result normal?
|
|
Replace the windshield wiper motor
assembly.
|
|
|
|
(1)Disconnect the connector, and measure at the wiring
harness side.
|
|
(3)Check the voltage between the B-09 windshield wiper motor
connector terminal No.2 and body earth. OK: Battery
voltage
|
|
Q.
Is the check result normal?
|
|
- Check the power supply line to ignition switch (ACC) for open
circuit.
|
|
Q.
Is the check result normal?
|
|
The
trouble can be an intermittent malfunction (Refer to GROUP 00 - How
to Cope with Intermittent Malfunction ).
|
|
|
|
Repair
the wiring harness.
|
|
|
|
Q.
Is the check result normal?
|
|
- Check the input signal lines.
|
|
Q.
Is the check result normal?
|
|
Repair
the wiring harness.
|
|
|
|
Check that the windshield wipers stop at the
specified park position.
|
|
Q.
Is the check result normal?
|
|
The
trouble can be an intermittent malfunction (Refer to GROUP 00 - How
to Cope with Intermittent Malfunction ).
|
|
|