HEADLAMP AUTOMATIC LEVELLING-ECU REMOVAL AND INSTALLATION



Removal steps


·
 Front side panel (Refer to GROUP 52A, Floor Console Assembly ).
<<A>>
1.
 Headlamp automatic levelling-ECU

REMOVAL SERVICE POINT

<<A>> HEADLAMP AUTOMATIC LEVELLING-ECU REMOVAL

1.Remove the connector bracket installed to the underside of the front heater unit.

2.Cut the silencer pad as shown in the figure to secure the working space.
note After installation of the headlamp automatic levelling-ECU, repair the cut silencer pad with adhesive tape.

note Use of commercially available offset screw driver is recommended.