|
1.Disconnect the sensor
connector and connect the special tool test harness
(MB991658) as shown. 2.Turn the ignition switch to
the ON position. 3.Measure the voltage at sensor
connector terminal No.2.
|
|
4.Check that voltages show
the values described in the graph according to the sensor
operation angle.
|
|
1.Disconnect the sensor
connector and connect the special tool test harness
(MB991658) as shown. 2.Turn the ignition switch to
the ON position. 3.Measure the voltage at sensor
connector terminal No.2.
|
|
4.Check that voltages show
the values described in the graph according to the sensor
operation angle.
|