|
1.Disconnect the No. 2
exhaust gas temperature sensor (catalyst temperature)
connector.
|
![](../../../img/17/ACE01578AB00ENG.png)
|
2.Measure the resistance
between terminal No. 1 and No. 2. Standard
value: 75 - 190 kΩ (at 20°C)
3.Remove the No. 2 exhaust gas
temperature sensor (catalyst
temperature). 4.Measure the resistance while
heating the sensor using a hair drier. Normal
condition:
|
Temperature
(°C)
|
Resistance
(kΩ)
|
Higher
|
Smaller
|
|
5.If the value deviates from the
standard value or the resistance remains unchanged, replace
the No. 2 exhaust gas temperature sensor (catalyst
temperature). 6.Install the No. 2 exhaust gas
temperature sensor (catalyst temperature) and tighten it to
the specified torque. Tightening torque: 30
± 5 N·m
|