![](../../../img/23/ACF00093AB00ENG.png)
|
1.Check that the selector
lever moves smoothly and accurately to each
position. 2.Check that the engine starts when the
selector lever is in the N or P position, and that it does
not start when the selector lever is in any other
position. 3.Start the engine, and check that the
vehicle moves forward when the selector lever is moved from
N position to the D position, and that the vehicle reverses
when the selector lever is moved to the R
position. 4.Stop the engine. 5.Turn the
power supply mode of engine switch to ON. Check that the
backup lamp illuminates when the selector lever is moved
from P position to R position.
note |
The shift lock mechanisms
prevent movement of the selector lever from the
P position if the ignition switch is in a
position other than LOCK (OFF) and the brake
pedal is not depressed.
|
|