|
Check that a door window glass
operates smoothly and moves along the door window glass
runchannel when the door window glass is fully raised and
lowered. If there is a problem, adjust the door window glass
by the following procedures:
|
|
1.Remove the door trim
assembly (Refer to GROUP 52A - Door Trim ).
|
|
2.Remove the waterproof film
(Refer to ).
|
|
3.Remove the power window
switch from the removed door trim assembly, and connect it
to the door side connector.
|
![](../../../img/42/ACF00954AB00ENG.png)
|
4.Set the channel guide
mounting bolts to the adjusting hole. 5.Raise the
door window glass with the power window switch to check that
the door window glass to door clearance is even. If there is
a problem, loosen the channel guide mounting bolts to adjust
tilting up/down of the door window glass.
|