REMOVAL AND INSTALLATION

		Washer tank assembly removal step
	·	Washer tank and rear washer motor (Refer to .)
		Rear washer nozzle removal steps
	1.	Rear washer nozzle assembly
		Rear wiper blade removal steps
	2.	Rear wiper blade assembly
>>A<<	3.	Rear wiper blade
		Rear wiper motor removal steps
	4.	Cover
>>B<<	5.	Rear wiper arm assembly
	·	Tailgate trim (Refer to GROUP 52A, Tailgate Trim )
>>C<<	6.	Grommet
	7.	Rear wiper motor assembly
		Rear washer hose removal steps
	·	Front/rear scuff plate, cowl side trim, quarter trim (Refer to GROUP 52A, Interior Trim )
	·	Tailgate trim (Refer to GROUP 52A, Tailgate Trim )
	8.	Rear washer hose

note

For removal and installation of the wiper and washer switch, refer to GROUP 54A, Column Switch

INSTALLATION SERVICE POINTS

caution

Use a curved backing like that shown for the backing of a wiper blade to ensure sustained wiper wiping performance.

Install so that the wiper blade end stops at the specified position.
Standard value (A): Align wiper blade end with defogger lower line.

Install so that the triangle mating mark on the grommet is aligned with the mark (circle) on the tailgate glass.