REMOVAL AND INSTALLATION

Removal steps 1. Side step assembly 2. Side step stay 3. Side step cover <<A>> >>A<< 4. Rivets 5. Side step plate 6. Side step

Use a drill (Φ 4.0 mm) to make a hole in the rivet to break it, and remove the rivet.

Use a rivet tool shown in the illustration to connect the parts with rivets by the following procedures. 1.Insert rivet into the side step and side step plate. 2.Place the rivet tool over portion A of rivet. 3.While pushing the flange surface of the rivet onto parts to be fixed with the rivet tool, press the handle of the tool. 4.Thin part of portion A of the rivet will cut off and the rivet is fixed in position.