|
|
1.Installation position
Attach each mark to the position shown in the
illustration.
|
|
|
2.Installation
procedure
(1)
Use the parts cleaner (MZ100387 or equivalent) to clean the
mark installation surfaces
on the body.
(2)
|
|
| caution |
When attaching the
marks, the ambient temperature
should
be 20 - 38°C and the air
should be completely free of dust.
If the ambient
temperature is lower than
20°C, the marks and the places
on the vehicle body where
the marks are to be attached should
be heated to 20 -
30°C.
|
|
Peel off the protection sheet on the back of the
mark to affix it in position.
|
).
