![](../../../img/23/ACE02032AB00ENG.png)
|
1.Remove the heat protector
from the transmission case.
|
![](../../../img/23/ACE02054AB00ENG.png)
|
2.Disconnect the output
shaft speed sensor connector. 3.Measure the
resistance between terminals 1 and 2 of the output shaft
speed sensor
connector. Standard value: 560 - 680
Ω (at 20°C) 4.If the
resistance is not within the standard value, replace the
output shaft speed
sensor. 5.After the output shaft speed sensor
connector is connected, install the heat protector
to the transmission case. Tightening torque: 11
± 1 N·m
|